====== VAXstation & MicroVAX boot process ======
=====MicroVAX 2000/VAXstation 2000 boot messages =====
The initial message will be something of the form:

<code>	 KA410-A V1.2
	 F_..E...D...C...B...A...9...8...7...6...5...4_..3_..2_..1_..
</code>

KA410-A will be displayed with the switch in multi-user MicroVAX 2000 mode, KA410-B if set to single user VAXstation 2000. V1.2 is the ROM rev level (for 4- or 8-plane colour graphics board, V2.1 is required). In the count-down a “_” means the item wasn't found.

Message	Error:
<code>
? E 0040 0000.0005	clock battery needs charged
? C 0080 0000.4001	odd-ball terminal as console - should still work
</code>

===== VAXstation 3100 Model 40 Power-Up and Self-Test Device Identifiers =====
<code>
Identifier	Device
F		Base video
E		System clock
D		Nonvolatile RAM
C		Serial line controller
B		Memory
A		Memory-management unit
9		Floating point unit
8		Interval timer
7		Disk controller option
6		Disk controller option
5		Interrupt controller and Ethernet ID ROM
4		Optional 8-plane graphics coprocessor
3		Reserved for later use
2		Reserved for later use
1		Ethernet network interconnect (NI)
</code>

~~NOTOC~~