To overide the ALOM password on the system you will need to:

1. Attach console to SC “SERIAL MGT” port
2. Power on the server via the front power button. Once POST has completed, you will need to wait 1 to 2 minutes for a timeout to occur and the system to drop to the “ok>” prompt.
   If you do not get the “Please login:” prompt (you will likely see the SC prompt) then you must power the system off remove the battery from the LOM board, wait a minute, and re-install everything).
   Below is an example of what you might see on the console:

   Please login: 
   SC Alert: Host System has Reset
   [wait one two minutes]
   Serial line login timeout, returns to console stream.
   ok>

3. Boot the system single usermode with the Solaris DVD:

   ok> boot cdrom -s

4. Use the scadm command to reset the admin password:

   cd /usr/platform/`uname -i`/sbin
   ./scadm userpassword admin
   ./scadm resetrsc

5. Use the escape sequence “#.” to get system back to the alom login prompt.
6. You can now log into the admin account using the password from step 4).